Items where Year is 2013

A

Agarwal, A (2013) Nano-Electronics for Bio-Chemical Sensors. In: National Conference on Bioelectronics & Biomedical Technology, January 29-30, 2013, Dept. of Biochemistry, Jamia Hamdard, New Delhi. (Submitted)

Agarwal, A (2013) Nano-Sensors for Bio-Medical Applications. In: First National Conference on Recent Developments in Electronics ( NCRDE 2013), January 18-20, 2013, University of Delhi, New Delhi. (Submitted)

Agarwal, PB and Kanwar, G and Yadav, S and Panwar, DK (2013) Positioning of Carbon Nanotubes between Micro-electrodes for CNT-FET Fabrication. In: International Conference on Emerging Technologies: Micro to Nano 2013 (ETMN - 2013), February 23-24, 2013, Goa, India. (Submitted)

Ahmed, M and Kumar, N and Pal, UN and Srivastava, V and Prakash, R (2013) Design and Characterization of Rippled Wall Slow Wave Structure for X-Band PASOTRON. In: IEEE International Conference on Pulsed Power & Plasma Science (PPPS-2013), June 16-21, 2013, San Francisco, CA, USA. (Submitted)

B

Bandyopadhyay, AK and Maity, S and Joshi, LM and Kan, D and Singh, AK (2013) Design of the Radio Frequency Section of a Multiple Beam Klystron working in the J-band Frequency Range. In: 14th International Vacuum Electronics Conference (IEEE-IVEC 2013), May 21-23, 2013, Paris. (Submitted)

D

Dwivedi, M and Mudgal, T and Srivastav, SR and Komal, J and Bhargava, AK and Sharma, AK and Vyas, V and Eranna, G (2013) Characterization of Zinc Oxide Thin Films for Gas Sensing Applications through Sputter Deposition and Thermal Annealing. In: International Conference on Emerging Technologies : Micro to Nano 2013 (ETMN-2013), February 23-24, 2013, BITS, Pilani, K.K. Birla Goa Campus, Goa. (Submitted)

G

Gulati, P and Pal, UN and Kumar, M and Prakash, R (2013) Experimental Study of Single Barrier DBD For the Application of Water Treatment. In: IEEE International Conference on Pulsed Power & Plasma Science (PPPS-2013), June 16-21, 2013, San Francisco, CA, USA. (Submitted)

Gupta, SK and Kumar, V and Pradhan, N and Das, S and Mann, AS and Akhtar, J (2013) Fabrication and Temperature Dependent Electrical Characterization of Ni/4H-SiC (0001) Schottky Barrier Diodes Equipped with Field Plate and Guard Ring Terminations structure. In: International Conference on Diamond and Carbon Materials (DIAM-2013), September 02-05, 2013, Rivadel Garda, Italy. (Submitted)

Gupta, SK and Singh, J and Pathak, BC and Gupta, AK and Kothari, P and Singh, A and Panwar, DK and Bhatia, RR and Akhtar, J (2013) An Extensive Fabrication of Eight Beam Configured Piezoresistive Micro Accelerometer. In: International Conference on Emerging Technologies: Micro to Nano 2013 (ETMN - 2013), February 23-24, 2013, Goa, India. (Submitted)

J

Jain, A and Gopal, R (2013) Analytical Modeling and Design Optimization of UV-LIGA based 4-DOF Vibratory Gyroscope. In: International Conference on Emerging Technologies : Micro to Nano 2013 (ETMN-2013), February 23-24, 2013, BITS, Pilani, K.K. Birla Goa Campus, Goa. (Submitted)

Jain, A and Gopal, R (2013) Design and Simulation of Structurally Decoupled 4-DOF MEMS Vibratory Gyroscope. In: 26th International Conference on VLSI Design 2013 & 12th International Conference on Embedded Systems (VLSID - 2013), January 5-10, 2013, Pune, India. (Submitted)

Jangid, SK and Bandyopadhyay, AK and Joshi, LM and Kant, D and Devi, N and Pal, D (2013) Design of Sheet Beam Electron Gun for a X-band Klystron. In: 14th International Vacuum Electronics Conference (IEEE-IVEC 2013), May 21-23, 2013, Paris. (Submitted)

Jhanwar, P and Sharma, A and Pandey, S and Bhatia, R and Rangra, KJ and Verma, S (2013) Thick Photoresist Optimization for MEMS Structures. In: International Conference on Emerging Technologies: Micro to Nano 2013 (ETMN - 2013), February 23-24, 2013, Goa, India. (Submitted)

Joshi, D and Sharma, N and Chaturvedi, N (2013) An Investigation of Different Stress-free Passivation Layer Designs In GaN HEMTs. In: International Conference on Recent Trends in Applied Physics and Materials Science (RAM - 2013), February 01-02, 2013, Govt. College of Engineering & Tech., Bikaner . (Submitted)

K

Kharbanda, D and Khanna, PK and Kumar, S and Sharma, IC (2013) Optimization of LTCC Structure for Stable Interconnections. In: 1st National Conference on Micro and Nano Fabrication (MNF-2013), January 21-23, 2013, CMTI, Bangalore. (Submitted)

Khatun, H and Singh, U and Kumar, N and Sahu, NK and Poonia, R and Singh, P and Sharma, SK and Mishra, A and Dwivedi, V and Alaria, MK and Ashok, K and Mukesh, K (2013) Recent Experimental Results of Magnetron Injection Gun (MIG) for 42 GHz 200 kW Gyrotron. In: 14th IEEE International Vacuum Electronics Conference (IEEE-IVEC-2013), May 21-23, 2013, Paris. (Submitted)

Kumar, A and Kumar, N and Singh, U and Yadav, V and Vyas, V and Sinha, AK (2013) Electrical Design of Brewster Window for Triple Frequency Gyrotron. In: National COnference on Innovation in Electronics & Communication Engineering (NIECE- 2013), February 22-23, 2013, Jaipur. (Submitted)

Kumar, DS and Suri, N and Khanna, PK (2013) Micro Thick Films Growth Problems on Low Temperature Cofired Ceramic Substrate in Pre-firing Method. In: 1st National Conference on Micro and Nano Fabrication (MNF-2013), January 21-23, 2013, CMTI, Bangalore. (Submitted)

Kumar, N and Verma, D and Ahmed, M and Pal, UN and Kumar, M and Prakash, R and Srivastava, V (2013) Technological Development for X-band Plasma Assisted Slow Wave Oscillator (PASOTRON). In: 14th IEEE International Vacuum Electronics Conference (IVEC-2013), May 21-23, 2013, Paris. (Submitted)

Kumar, N and Yadav, V and Singh, U and Kumar, A and Sinha, AK (2013) Dielectric Measurements of Coolant Materials used in Gyrotron Window. In: National Conference on Innovation in Electronics and Communication Engineering (NIECE - 2013), February 22-23, 2013, Jaipur. (Submitted)

Kumar, S and Negi, GS and Akhtar, J (2013) Design and Fabrication of Smart Micro Reservoir for Biomedical Application. In: International Conference on Emerging Technologies: Micro to Nano 2013 (ETMN - 2013), February 23-24, 2013, Goa, India. (Submitted)

Kumar, SS and Pant, BD (2013) Effect of Temperature on Etch Rate and Undercutting of (100) Silicon using 25% TMAH. In: International Conference on Emerging Technologies : Micro to Nano 2013 (ETMN-2013), February 23-24, 2013, BITS, Pilani, K.K. Birla Goa Campus, Goa. (Submitted)

L

Lamba, RP and Meena, BL and Pal, UN and Kumar, N and Prakash, R (2013) Design and Development of a High Current Pseudospark Switch for Pulse Power Applications. In: IEEE International Conference on Pulsed Power & Plasma Science ( PPPS-2013), June 16-21, 2013, San Francisco, CA, USA. (Submitted)

M

Mittal, S and Makwana, I and Chaturvedi, N and Chaturvedi, N (2013) Role of Sensing Parameters in Breast Cancer Detection using GaN HEMTs. In: International Conference on Emerging Technologies: Micro to Nano (ETMN - 2013), February 23-24, 2013, KK Birla, Goa . (Submitted)

N

Nag, A and Singh, S and Kishore, K and Akbar , SA (2013) A Robust H-infinity Based Depth Control of an Autonomous Underwater Vehicle. In: INTERNATIONAL CONFERENCE ON ADVANCED ELECTRONIC SYSTEM(ICAES-2013). (Submitted)

P

Prasad, M and Arora, N and Khanna, VK (2013) Design, Simulation and Fabrication of Platinum based Micro-heater for Gas Sensing Application. In: International Conference on Emerging Technologies : Micro to Nano 2013 (ETMN-2013), February 23-24, 2013, BITS, Pilani, K.K. Birla Goa Campus, Goa. (Submitted)

R

Raheja, JL and Sharma, S and Plinge, A and Fink, GA (2013) Lip-Contourbased Speaker Activity Detection in Smart Environment. In: 14 th IEEE International Vacuum Electronics Conference (IVEC-2013), May 21-23, 2013, Paris. (Submitted)

S

Saini, AK and Bhadauria, A (2013) CMOS Compatible RF MEMS based FBAR for Wireless applications: Design, Model and Simulation. In: First National Conference on Recent Developments in Electronics ( NCRDE 2013), January 18-20, 2013, University of Delhi, New Delhi. (Submitted)

Sekhar, DB and Taube, WR and Kothari, P and Kumar, A (2013) Improvement in Dispersion of SWCNT by Functionalization. In: International Conference on Emerging Technologies: Micro to Nano 2013 (ETMN - 2013), February 23-24, 2013, Goa, India. (Submitted)

Sharma, SK and Singh, NK and Sahu, NK and Sharma, MK and Singh, P and Prakash, R and Srivastava, D and Mishra, A and Singh, U and Dwivedi, V and Khatun, H and Alaria, M and Jain, PK and Sinha, AK (2013) Development of Gun-Collector Module for 42 GHz, 200 KW Gyrotron. In: National Conference on Innovation in Electronics and Communication Engineering (NIECE - 2013), February 22-23, 2013, Jaipur. (Submitted)

Singh, U and Kumar, A and Kumar, N and Sinha, AK (2013) Design of Triple- frequency Gyrotron. In: 14th IEEE International Vacuum Electronics Conference (IEEE - IVEC - 2013), May 21-23, 2013, Paris. (Submitted)

Singh, U and Kumar, N and Kumar, A and Yadav, V and Sinha, AK (2013) Towards the Design of 100 kW, 95 GHz Gyrotron for Active Denial System Application. In: 14th IEEE International Vacuum Electronicss Conference (IEEE-IVEC-2013), May 21-23, 2013, Paris. (Submitted)

Suri, N and Khanna, PK and Kumar, S and Sharma, IC (2013) Fabrication of Inductor in LTCC technology. In: 1st National Conference on Micro and Nano Fabrication ( MNF-2013), January 21-23, 2013, CMTI, Bangalore. (Submitted)

T

Taube, WR and Kumar, A and Das, S and Sheoran, G and Sharma, RK and Saini, V and Panwar, DK and Bhatia, RR (2013) FDTD Simulation of Photon Absorption and Fabrication of Silicon Nano-wires Array for Solar Cells. In: International Conference on Emerging Technologies : Micro to Nano 2013 (ETMN-2013), February 23-24, 2013, BITS, Pilani, K.K. Birla Goa Campus, Goa. (Submitted)

Y

Yadav, V and Kumar, N and Singh, U and Kumar, A and Deorani, SC and Sinha, Ak (2013) RF Characterization of 28 GHz, 200 kW Gyrotron Resonator by Using Quasi Optical Bench. In: National Conference on Innovation in Electronics and Communication Engineering (NIECE - 2013), February 22-23, 2013, Jaipur. (Submitted)