Items where Division is "Semiconductor Devices" and Year is 2013

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | D | G | J | K | M | P | S | T
Number of items: 20.

A

Agarwal, A (2013) Nano-Electronics for Bio-Chemical Sensors. In: National Conference on Bioelectronics & Biomedical Technology, January 29-30, 2013, Dept. of Biochemistry, Jamia Hamdard, New Delhi. (Submitted)

Agarwal, A (2013) Nano-Sensors for Bio-Medical Applications. In: First National Conference on Recent Developments in Electronics ( NCRDE 2013), January 18-20, 2013, University of Delhi, New Delhi. (Submitted)

Agarwal, PB and Kanwar, G and Yadav, S and Panwar, DK (2013) Positioning of Carbon Nanotubes between Micro-electrodes for CNT-FET Fabrication. In: International Conference on Emerging Technologies: Micro to Nano 2013 (ETMN - 2013), February 23-24, 2013, Goa, India. (Submitted)

D

Dwivedi, M and Mudgal, T and Srivastav, SR and Komal, J and Bhargava, AK and Sharma, AK and Vyas, V and Eranna, G (2013) Characterization of Zinc Oxide Thin Films for Gas Sensing Applications through Sputter Deposition and Thermal Annealing. In: International Conference on Emerging Technologies : Micro to Nano 2013 (ETMN-2013), February 23-24, 2013, BITS, Pilani, K.K. Birla Goa Campus, Goa. (Submitted)

G

Gupta, SK and Kumar, V and Pradhan, N and Das, S and Mann, AS and Akhtar, J (2013) Fabrication and Temperature Dependent Electrical Characterization of Ni/4H-SiC (0001) Schottky Barrier Diodes Equipped with Field Plate and Guard Ring Terminations structure. In: International Conference on Diamond and Carbon Materials (DIAM-2013), September 02-05, 2013, Rivadel Garda, Italy. (Submitted)

Gupta, SK and Singh, J and Pathak, BC and Gupta, AK and Kothari, P and Singh, A and Panwar, DK and Bhatia, RR and Akhtar, J (2013) An Extensive Fabrication of Eight Beam Configured Piezoresistive Micro Accelerometer. In: International Conference on Emerging Technologies: Micro to Nano 2013 (ETMN - 2013), February 23-24, 2013, Goa, India. (Submitted)

J

Jain, A and Gopal, R (2013) Analytical Modeling and Design Optimization of UV-LIGA based 4-DOF Vibratory Gyroscope. In: International Conference on Emerging Technologies : Micro to Nano 2013 (ETMN-2013), February 23-24, 2013, BITS, Pilani, K.K. Birla Goa Campus, Goa. (Submitted)

Jain, A and Gopal, R (2013) Design and Simulation of Structurally Decoupled 4-DOF MEMS Vibratory Gyroscope. In: 26th International Conference on VLSI Design 2013 & 12th International Conference on Embedded Systems (VLSID - 2013), January 5-10, 2013, Pune, India. (Submitted)

Jhanwar, P and Sharma, A and Pandey, S and Bhatia, R and Rangra, KJ and Verma, S (2013) Thick Photoresist Optimization for MEMS Structures. In: International Conference on Emerging Technologies: Micro to Nano 2013 (ETMN - 2013), February 23-24, 2013, Goa, India. (Submitted)

Joshi, D and Sharma, N and Chaturvedi, N (2013) An Investigation of Different Stress-free Passivation Layer Designs In GaN HEMTs. In: International Conference on Recent Trends in Applied Physics and Materials Science (RAM - 2013), February 01-02, 2013, Govt. College of Engineering & Tech., Bikaner . (Submitted)

K

Kharbanda, D and Khanna, PK and Kumar, S and Sharma, IC (2013) Optimization of LTCC Structure for Stable Interconnections. In: 1st National Conference on Micro and Nano Fabrication (MNF-2013), January 21-23, 2013, CMTI, Bangalore. (Submitted)

Kumar, DS and Suri, N and Khanna, PK (2013) Micro Thick Films Growth Problems on Low Temperature Cofired Ceramic Substrate in Pre-firing Method. In: 1st National Conference on Micro and Nano Fabrication (MNF-2013), January 21-23, 2013, CMTI, Bangalore. (Submitted)

Kumar, S and Negi, GS and Akhtar, J (2013) Design and Fabrication of Smart Micro Reservoir for Biomedical Application. In: International Conference on Emerging Technologies: Micro to Nano 2013 (ETMN - 2013), February 23-24, 2013, Goa, India. (Submitted)

Kumar, SS and Pant, BD (2013) Effect of Temperature on Etch Rate and Undercutting of (100) Silicon using 25% TMAH. In: International Conference on Emerging Technologies : Micro to Nano 2013 (ETMN-2013), February 23-24, 2013, BITS, Pilani, K.K. Birla Goa Campus, Goa. (Submitted)

M

Mittal, S and Makwana, I and Chaturvedi, N and Chaturvedi, N (2013) Role of Sensing Parameters in Breast Cancer Detection using GaN HEMTs. In: International Conference on Emerging Technologies: Micro to Nano (ETMN - 2013), February 23-24, 2013, KK Birla, Goa . (Submitted)

P

Prasad, M and Arora, N and Khanna, VK (2013) Design, Simulation and Fabrication of Platinum based Micro-heater for Gas Sensing Application. In: International Conference on Emerging Technologies : Micro to Nano 2013 (ETMN-2013), February 23-24, 2013, BITS, Pilani, K.K. Birla Goa Campus, Goa. (Submitted)

S

Saini, AK and Bhadauria, A (2013) CMOS Compatible RF MEMS based FBAR for Wireless applications: Design, Model and Simulation. In: First National Conference on Recent Developments in Electronics ( NCRDE 2013), January 18-20, 2013, University of Delhi, New Delhi. (Submitted)

Sekhar, DB and Taube, WR and Kothari, P and Kumar, A (2013) Improvement in Dispersion of SWCNT by Functionalization. In: International Conference on Emerging Technologies: Micro to Nano 2013 (ETMN - 2013), February 23-24, 2013, Goa, India. (Submitted)

Suri, N and Khanna, PK and Kumar, S and Sharma, IC (2013) Fabrication of Inductor in LTCC technology. In: 1st National Conference on Micro and Nano Fabrication ( MNF-2013), January 21-23, 2013, CMTI, Bangalore. (Submitted)

T

Taube, WR and Kumar, A and Das, S and Sheoran, G and Sharma, RK and Saini, V and Panwar, DK and Bhatia, RR (2013) FDTD Simulation of Photon Absorption and Fabrication of Silicon Nano-wires Array for Solar Cells. In: International Conference on Emerging Technologies : Micro to Nano 2013 (ETMN-2013), February 23-24, 2013, BITS, Pilani, K.K. Birla Goa Campus, Goa. (Submitted)

This list was generated on Tue Jun 18 21:12:40 2019 IST.