Items where Author is "Sharma, A"

Sharma, A and Pal, S and Mahalle, P and Botre, BA and Akbar, SA (2019) The Development of Current, Speed and Torque Measurement System for Low Power Electric Vehicle Motion Control Applications. In: 4th International Conference on Emerging Technologies: Micro to Nano (ETMN-2019), December 16-17, 2019, Pune, India.

Mukhiya, R and Santosh, M and Sharma, A and Kumar, SS and Bose, SC and Gopal, R and Pant, BD (2019) Fabrication and Characterization of a Bulk Micromachined Polysilicon Piezoresistive Accelerometer. In: International Conference on Advances in Nanomaterials and Devices for Energy and Environment (ICAN-2019), January 27-29, 2019, ABV-IIITM, Gwalior.

Chaudhary, R and Sharma, A and Sinha, S and Yadav, J and Sharma, R and Mukhiya, R and Khanna, VK (2015) Fabrication and Characterization of Al gate n-MOSFET, On-chip Fabricated with Si3N4 ISFET. In: 4th International Symposium on VLSI Design & Test (VDAT 2015), June 26-27, 2015, Institute of Technology, Nirma University, Ahmedabad. (Submitted)

Yadav, J and Sinha, S and Sharma, A and Chaudhary, R and Mukhiya, R and Sharma, R and Khanna, VK (2015) Simulation and Characterization of Dual-Gate SOI MOSFET, On-chip Fabricated with ISFET. In: 4th International Symposium on VLSI Design & Test (VDAT 2015), June 26-27, 2015, Institute of Technology, Nirma University, Ahmedabad. (Submitted)

Jhanwar, P and Sharma, A and Pandey, S and Bhatia, R and Rangra, KJ and Verma, S (2013) Thick Photoresist Optimization for MEMS Structures. In: International Conference on Emerging Technologies: Micro to Nano 2013 (ETMN - 2013), February 23-24, 2013, Goa, India. (Submitted)

Bansal, D and Sharma, A and Kaur, M and Dwivedi, P and Rangra, KJ (2012) Packaging of MEMS Structures using Localized Heating. In: Fifth ISSS National Conference on MEMS, Smart Materials, Structures and Systems, September 21-22, 2012, Institute of Smart Structures & Systems (ISSS), Karpagam University, Coimbatore. (Submitted)

Sharma, A and Bansal, D and Rangra, KJ and Kumar, D (2012) A Test Structure for In-situ Determination of Residual Stress. In: IEEE Sensors 2012, October 28 - 31, 2012 , Taipei, Taiwan. (Submitted)

Bansal, D and Sharma, A and Kaur, M and Rangra, KJ (2011) Design of Vertical Packaging Technology for RF MEMS Switch. In: 16th International Workshop on the Physics of Semiconductor Devices (IWPSD - 2011), December 19 - 22, 2011, IIT Kanpur, India. (Submitted)

Maninder, K and Rangra, KJ and Sharma, A and Kumar, D and Singh, S (2010) Design of Compact, High Capacitance Ratio MEMS switch for X - Band Applications using High-k Dielectric Materials. In: Tech Connect World Conference & Expo 2010, June 21-25, 2010, Anaheim, California (U.S.A.). (Submitted)

Manindera, K and Sharma, A and Kumar, D and Singh, S and Rangra, KJ (2010) Low loss STS based SPDT for X – band Applications. In: International Conference on Eurosensors (XXIV), September 5-8, 2010, Linz, Austria. (Submitted)

Singh, K and Mathew, M and Singh, M and Pradhan, N and Sharma, A and Kumar, P and Chauhan, A and Gupta, AK and Pathak, BC and Johri, S (2009) Fabrication of 980 nm High Power Broad Area Laser Diodes. In: International Conference on Optics & Photonics ( ICOP-2009) , October 30 - November 1, 2009, CSIO, Chandigarh. (Submitted)